Vortex EZ Cleaning Station
Dissolving of
Support material:
Vortex EZ Dissolution Station
Vortex EZ is an easy-to-use and affordable station for removing support material. It simplifies post-processing in the office, workshop, laboratory, school, and production environment.
- Large basket450 × 260 × 205 mm
- Up to 85 °Cpowerful heater
- Plug and PlaySafe operation
or pull to open the lid
Vortex EZ: Easy to use,
powerful in action.
The perfect solution for the gentle and effective removal of support material for best results – reliable, safe and efficient.
-
Large stainless steel basket
450 × 260 × 205 mm for large 3D printed parts
-
Powerful heating
Temperature range 30–85°C
-
Secure plug-and-play operation
Simply connect and get started
-
Robust and durable design
For office, workshop, laboratory and production
Achieve results in 5 steps
Prepare your support material in 5 simple steps.
With Vortex EZ, you remove support material quickly, safely, and reliably. This ensures clean surfaces and installation-ready components.
Fill with water and washing powder
Fill with water and add the recommended amount of our VXL EX washing powder.
More about VXL EX
Set temperature
Set the desired temperature (30–85°C).
Supports are being dissolved
The support material dissolves safely and gently.
Rinse part
Rinse the part with clear water – done.
Technical specifications
All the important information at a glance.
| External dimensions (L × W × H) | 640 × 370 × 450 mm |
|---|---|
| Max. part size (basket) | 450 × 260 × 205 mm |
| Tank volume | 11–38 liters |
| Weight (without solution) | 22 kg |
| Temperature range | 30–85 °C |
| Heating time (38 L, 20–70 °C) | approx. 2.5 hours |
| Recommended model materials | No restrictions Observe the temperature resistance of your model material |
| Recommended support material | VXL (all types), PVA, BVOH |
| Peak power (during heating) | 1220 W (110 V/60 Hz) · 1360 W (230 V/50 Hz) |
|---|---|
| Average power at 85 °C | approx. 250 W full tank, maintaining temperature |
| Power supply | AC 230 V/50 Hz (EU version) · AC 110 V/60 Hz (US version) |
| Dissolution technology | Continuous circulation and heat |
| Maintenance interval | As needed |
|---|---|
| CE conformity | EU |
| Warranty | 12 months excluding accessories and consumables |
|---|
Perfectly coordinated
Would you like to try the
VXL support material?
VXL EX is an environmentally friendly, safe, and non-corrosive washing powder specially developed for dissolving VXL support material. For clean results and easy handling.
- Environmentally friendlyand safe
- Non-corrosive
- Specially forVXL Support Material
Vortex EZ
Ready for clean
results?
Vortex EZ – the reliable and affordable solution for removing support material.
Helpful Resources