Vortex EZ Cleaning Station
Dissolving of
Support Material:
Vortex EZ Dissolution Station
Vortex EZ is an easy-to-use and affordable station for removing support material. It simplifies post-processing in the office, workshop, laboratory, school, and production environment.
- Large basket450 × 260 × 205 mm
- Up to 85 °Cpowerful heater
- Plug and PlaySafe operation
or pull to open the lid
Vortex EZ: Easy to use,
powerful in action.
The perfect solution for the gentle and effective removal of support material for best results – reliable, safe and efficient.
-
Large stainless steel basket
450 × 260 × 205 mm for large 3D printed parts
-
Powerful heating
Temperature range 30–85°C
-
Secure plug-and-play operation
Simply connect and get started
-
Robust and durable design
For office, workshop, laboratory and production
Achieve results in 5 steps
Prepare your support material in 5 simple steps.
With Vortex EZ, you remove support material quickly, safely and reliably. This ensures clean surfaces and installation-ready components.
Fill with water and washing powder
Fill with water and add our VXL EX washing powder.
More about VXL EX
Set temperature
Set the desired temperature (30–85°C).
Supports are being dissolved
The support material dissolves safely and gently.
Rinse part
Rinse the part with clear water – done.
Technical specifications
All the important information at a glance.
| External dimensions (L × W × H) | 640 × 370 × 450 mm |
|---|---|
| Max. part size (basket) | 450 × 260 × 205 mm |
| Tank volume | 11–38 liters |
| Weight (without solution) | 22 kg |
| Temperature range | 30–85 °C |
| Heating time (38 L, 20–70 °C) | approx. 2.5 hours |
| Recommended model materials | No restrictions Please note the temperature resistance of your model material |
| Recommended support material | VXL (all types), PVA, BVOH |
| Maximum power (during heating) | 1220 W (110 V/60 Hz) · 1360 W (230 V/50 Hz) |
|---|---|
| Average power at 85 °C | approx. 250 W full tank, maintaining temperature |
| Power supply | AC 230 V/50 Hz (EU version) · AC 110 V/60 Hz (US version) |
| Brewing method | Continuous circulation and heat |
| Maintenance interval | As needed |
|---|---|
| CE conformity | EU |
| Warranty | 12 months excluding accessories and consumables |
|---|
Perfectly coordinated
Would you like to try the
VXL support material?
VXL EX is an environmentally friendly, safe, and non-corrosive washing powder specially developed for dissolving VXL support material. For clean results and easy handling.
- Environmentally friendlyand safe
- Non-corrosive
- Specially forVXL Support Material
Vortex EZ
Ready for clean
results?
Vortex EZ – the reliable and affordable solution for removing support material.
Helpful Resources